BNC Plug to RCA Socket.

RCA Plug to BNC Socket.

Cat Code: BNC-BNC $2

BNC female Socket to BNC female Socket. Connector suitable for lengthening Plug-In DIY 20 metre Video & Power Cable.

Cat Code: RCA-RCA $2

RCA female Socket to RCA female Socket. suitable for lengthening Plug-In DIY 20 metre Video & Video or Video & Audio & Power Cable

Cat Code: Cable-2155L $3 2.1 x 5.5 mm male Plug on ~ 1500 mm Cable (not stripped & tinned).

2.1 x 5.5 mm male Plug with Plug-In Screw Terminal Block for wires.

2.1 x 5.5 mm Right Angle male Plug on ~ 150 mm Cable with stripped & tinned wires.

Click on image to enlarge
Transmit power 600 + metres via one pair using 24 vac Power & Rectifier-Regulator. Cable resistance, length & Load Current affect cable voltage drop which can be reduced by using thicker wire &/or paralleling pairs. A test using a 24 AWG Cat-5 pair, 24 vac Power Supply, REG-12VDC and a device that draws 100 milliamps demonstrated that lengths of 600 + metres is practical, 2 pairs in parallel would increase this to 1 200 + metres. A single 24 AWG (0.5 mm diameter) conductor has a resistance of ~ 9.4 ohms per 100 metres, voltage drop will be ~ 1 volt per 50 metres of Cat-5 Twisted Pair when powering a device that draws 100 milliamps. (9.4 ohms x 0.1 amps = 0.94 Volts)

This easy Passive PoE (Power over Ethernet) Power Inserter/Extractor utilises unused pairs (pins 4, 5, 7, 8) in a 100 baseT network cable to transmit power to remote network devices. It is a low cost, easy solution to provide power for network products that do not support Power Over Ethernet or Security Cameras.

for Network devices deliver data & electrical power to Ethernet devices using a single Ethernet cable, eliminates the need to position LAN devices such as Network IP Cameras, Network Video Servers, Wireless Access Points, etc., near a power outlet, providing freedom of placement.

for Baluns & unshielded twisted pair cable for transmission of Composite Video, S-Video &/or Audio signals together with Power over a single 4 pair Cat-5 Cat-6 Cable, eliminates the need to position Security Cameras near a power outlet, providing freedom of placement.

Power over Ethernet (PoE) Adaptor is compact & simple to install. Connect one Adaptor to 5/12/24/48 volt power supply & another to the device to be powered via a standard Ethernet cable, power is transmitted via pins 4&5 (Black with White trace) and pins 7&8 (Black wire). Simplifies installation of Network devices & Security Cameras allowing them to be placed beyond the range of existing power outlets, mount devices in a ceiling or outside.

Click on image to enlarge

This easy Passive PoE (Power over Ethernet) Power Inserter/Extractor utilises unused pairs of 100 baseT network cable to transmit power to remote network devices. It is a low cost, easy solution to provide power for network products that do not support Power Over Ethernet or Security Cameras.

for Network devices deliver data & electrical power to Ethernet devices using a single Ethernet cable, eliminates the need to position LAN devices such as Network IP Cameras, Network Video Servers, Wireless Access Points, etc., near a power outlet, providing freedom of placement.

for Baluns & unshielded twisted pair cable for transmission of Composite Video, S-Video &/or Audio signals together with Power over a single 4 pair Cat-5 Cat-6 Cable, eliminates the need to position Security Cameras near a power outlet, providing freedom of placement.

Power over Ethernet (PoE) Adaptor is simple to install, it's compact size makes installation easy. Connect one Adaptor to 5/12/24/48 volt power supply & another to the device to be powered via a standard Ethernet cable. Simplifies installation of Network devices & Security Cameras allowing them to be placed beyond the range of existing power outlets, mount devices in a ceiling or outside.

Transmit power up to ~ 1000 metres via 2 parallel pairs using a 24 vac Power Supply & Rectifier-Regulator. Cable resistance, length & Device Current affect voltage drop which can be reduced by using thicker gauge wire &/or paralleling pairs. A test using a 24 AWG Cat-5 pair, 24 vac Power Supply, REG-12VDC & a device that draws 100 milliamps demonstrated that lengths of 600 + metres is practical, 2 pairs in parallel would increase this to 1 200 + metres. A single 24 AWG (0.5 mm diameter) conductor has a resistance of ~ 9.4 ohms per 100 metres, voltage drop will be ~ 1 volt per 50 metres of Cat-5 Twisted Pair when powering a device that draws 100 milliamps. (9.4 ohms x 0.1 amps = 0.94 Volts)

Cat Code: Cable-3813/L $3 1.3 x 3.8 mm male Plug on ~ 1500 mm Cable (not stripped & tinned).

2.1 x 5.5 mm female Socket ~ 75 mm Cable (not stripped & tinned).

Ideal for use with Cameras that have 'Screw Terminals' and Power Supply or Cable with 2.1 x 5.5 mm Plug.

RCA Socket on ~ 75 mm shielded Coax Cable (not stripped & tinned).

BNC Socket on ~ 75 mm shielded Coax Cable (not stripped & tinned).

RCA Plug (Yellow or White) on ~ 75 mm shielded Coax Cable (not stripped & tinned).

Adaptor 5.5 mm x 2.1 mm Male to 5.5 mm x 2.1 mm Male.

Cat Code: RCA-Split $3

RCA male Plug to Two RCA female Sockets.

BNC solderless 6 mm diameter cable entry Right-Angle.

SMA male (internal thread, pin contact, Hex Nut) to N male. Suitable for W12dB, F16 & F18 antennas.

SMA male (internal thread, pin contact, Hex Nut) to SMA male. Suitable for P10 antenna.

Conventional SMA (external thread, socket contact) to Reverse Polarity SMA connector (internal thread, socket contact, Hex Nut)

Center Socket Contact on both ends (no Pins), converts Reverse Polarity SMA to conventional SMA (use with Netcomm NB9W, etc)

Conventional SMA connector (internal thread, pin contact, Hex Nut) to Reverse Polarity SMA connector (external thread, pin contact)

Central Pin Contact on both ends.

Cat Code: Phono-1 $1.50

3.5 mm Mono Phono male Plug to 3.5 mm Stereo female Socket.

3.5 mm Mono Phono male Plug to BNC female Socket.

TNC Crimp Bulkhead Jack TransRadio CRTBN 6/7A, Q93887N, B34585.

Suits all Auto Iris Cameras in this catalogue.

BNC Crimp Bulkhead Jack TransRadio CRTBN 6/7A, Q93753A, B35230.

HD15 Male Plug. Suitable for AutoCam

DB50 socket, panel mount 50 pin.