|
Video
System: PAL Colour fully compatible with Australian TV System.
Image Device:
976(H) x 582(V)
568 032 Pixel ⅓"
SONY ICX673AK,
5 µm (H) x 6.25 µm (V) pixel size.
*CCD=CCD image sensor "Super HAD CCD II"
is a trademark of Sony Corporation. The "Super HAD CCD II" is a
version of Sony's high performance CCD HAD (Hole-Accumulation
Diode) sensor with realized sensitivity (typical) of 1000mV or
more per 1µm2 (Color: F5.6/ BW: F8
in 1 s accumulation equivalent.)
DSP: SONY
Effio-E CXD4127 New-Technology Wide-Bandwidth Digital Signal
Processor.
Lens:
Motorised Focus/Zoom, 18X Optical
ZOOM, focal length 5 mm ~ 90 mm, Automatic Iris.
Setup: On Screen Display,
menu driven via push-buttons on Back of Camera or remotely via
RS485 (Pelco-D protocol) or via 6 wire DC interface.
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation:
Internal.
Video Output: 1.14 V
p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket.
Sensor/DSP
Resolution:
960H/Effio-E
650+ HTVL-E
better than Super-VHS, SDTV, DVD resolution.
Whitepapers:
HTVL Effective Specification &
Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems
Sensitivity: ~
0.1 Lux @ F1.2 without IR-CUT Filter, (this
value is provided for comparative purposes only)
Camera produces images in total darkness with an
Infrared Illuminator.
Day Night: Motorised
movable Infrared Cut Filter (IR-CUT) Automatic (Filter moves
based on illumination level), Colour (Filter in optical path),
Monochrome (Filter out of optical path).
Movable Infrared Optical
Filter: Automatic switching based on
illumination level.
In Day mode (well lit, colour) mechanism
automatically positions IR-CUT optical filter between
Lens and Image Sensor to exclude Infrared radiation that would
otherwise adversely affect colour reproduction, this ensures
colour rendition not possible with
ordinary non-filtered or notch-filter type Day/Night cameras.
more
In Night mode (low light, monochrome)
mechanism automatically removes IR-CUT
optical filter allowing Infrared radiation to pass boosting low
light and Infrared sensitivity, the result is significantly
better night images using an
Infrared Illuminator or with Infrared
rich light sources.
Infrared Response
without Infrared filter is ~ 700 to ~
1100 nm better than a
'CCTV
notch IR Filter',
additional
CCTV Infrared Night Vision information.
Signal to Noise ratio (SNR): 50 +
dB, measured with AGC off.
Back Light Compensation: On / Off.
Automatic Gain Control
(AGC): 3 levels.
Gamma: 0.45.
Power Requirements: 12
Volts DC Regulated, ~ 100 milliamps static ~ 200 milliamps when
Zoom/Focus Motors are operating, via Screw Terminal Block.
Dimensions (mm): ~ 126
x 78 x 63, excludes BNC Socket & I/O Terminal Block.
Mass (grams): ~ 580.

Made in China.
Manufacturer: Established 1997

|