|
A BETTER
SOLUTION !
View 100% !
View Sharper
Images !
View Images
Accurately with less Distortion !
View
steadier images with negligible flicker with Line-Doubling !
De-Interlaces
PAL signals and converts to 50, 60 or 75 Hz Progressive Scan
to suit LCD VGA Monitors !
Ordinary Video
Monitors and Televisions are generally more expensive than PC
Monitors and the images they produce suffer from many
shortcomings:
Flicker
Distortion (poor linearity)
Low Resolution, lack sharpness and detail
Over Scan (you lose up to 15% of the image)
Poor overall convergence
In contrast, the cheapest
Computer VGA Monitor will generally produce images with
considerably better:
Linearity (geometrically
more accurate)
Bandwidth and Resolution (sharpness and detail)
Zero Overscan (see 100% of the width and height of images)
Convergence (more accurate from edge to edge and in corners)
This VIDEO TO VGA MONITOR
converter will convert all Composite and S-Video (Y/C) video
signals into a non-interlaced VGA signal for display on most
progressive scan PC CRT / LCD Monitors, Plasma Displays & LCD
Projectors.
On-Screen-Display function
and Remote Control allows this user-friendly unit to be easily
connected to a VGA Computer Monitor and almost any Video
Source such as Digital Video Recorder, CCTV Video Surveillance
Camera, Quad Processor, Multiplexer, Switcher, VCR, DVD
player, TV, Video Game Machines, etc, without any software
installation, just plug-in and view.
An existing Computer System
Monitor can be shared between Surveillance Monitoring and
usual Computer purposes at the press of a button.
Ideal for display of 100% of
Quad & Multi-Split Screen images, with an ordinary TV or Video
Monitor, eight 'sides' of a Quad image may be cropped and lost
due to Over-Scan.
 |
 |
 |
|
100% seen on VGA Monitor |
90% seen on TV / Video
Monitor |
10% lost on TV / Video
Monitor |
Over-Scan is
typically 5% ~ 15% on an ordinary TV or Video Monitor, above
representation is 10%.
Specifications:
3:2 Pulldown conversion for
film mode.
2:2 Pulldown graphic mode.
3D Motion-Adaptive inter-field de-interlacing.
Sports & Static Picture Modes.
Excellent video quality with negligible flicker compared to an
ordinary Video Monitor or TV.
Plug-in and View installation, no software or PC required.
Inputs: Composite VIDEO (RCA
female), Y/C (S-VIDEO) (4 pin female), VGA (HD15 female),
AUDIO Line Level (3.5 mm female & 2 x RCA female).
Outputs: VGA monitor (HD15 female) & AUDIO Line Level (3.5 mm
female).
Compatible with: PAL BGHI /
NTSC M, NTSC 4.43 (50Hz) / PAL 4.43 (60Hz), PAL N / NTSC 4.43
(60Hz), NTSC N / PAL M and SECAM TV systems, not
suitable for EIA / CCIR monochrome signals. This
device takes a moment to recognise input signal and is
therefore not suitable for discontinuous signals such as those
from an unsynchronised Switcher, etc.
Computer VGA output to VGA
monitor output (pass-through) PC = 640x480 60/72/75/85
Hz, 800x600 56/60/72/75 Hz, 1024x768 60/75 Hz, 1280x1024 60
Hz. MAC = 512x384 70 Hz, 640x480 66/85 Hz.
VGA output 800x600 with 50 Hz input, 640x480 with 60 Hz input.
VGA output 1024x768, 1280x1024 when using 50 Hz to 60/75 Hz
conversion or 60 Hz to 75 Hz conversion.
PAL 50 Hz input conversion to progressive scan VGA @ 50 Hz, 60
Hz or 75 Hz vertical rate.
SECAM 50 Hz input conversion to progressive scan VGA @ 50 Hz,
60 Hz or 75 Hz vertical rate.
NTSC 60 Hz input conversion to progressive scan VGA @ 75 Hz
vertical rate.
On Screen Display (OSD)
function.
14 Key Remote Control.
Power Requirements: 6 ~ 8 Volts DC unregulated, ~ 600 mA via
2.1 x 5 mm DC socket, center = (+). Australian/NZ
6 VDC unregulated 800 mA Plug Pack included.
Minimum system
requirement
No specific or any PC system
required.
VESA VGA compatible monitor, HSync 31.25kHz & VSync 50Hz
(PAL) AUSTRALIA or HSync 31.5kHz and VSync 60Hz with
PAL signals using 50 Hz (PAL) to 60 Hz conversion. WHEN
USING FREQUENCY CONVERSION THIS UNIT IS COMPATIBLE WITH MOST
PC VGA MONITORS MANUFACTURED THIS MILLENNIUM.
Video input device: e.g.
Camera, Quad, Multiplexer, Switcher, Video Sender Receiver,
Video Wireless Receiver, VCR, DVD Player, TV, Game Machine or
any other standard Composite Video or S-Video Y/C source.
Other advantages of
using a PC Monitor
It may be possible to use PC
Monitor in standby power saving mode ready to instantly
display images using Remote Control.
Warranty period is often Three Years compared to One for Video
Monitors and TVs.
Usually supplied with a convenient Swivel and Tilt base. |
Air