|
|
Cat Code: TX-CAM2
|
|
Connection info here
Pictured with Micro Plug-In Antenna (supplied)
|
$229
Wireless Camera /
Transmitter with 3.7 mm Board Lens and Micro Antenna.
High
Sensitivity * High Signal:Noise Ratio
Compact 2.4 GHz 4 Channel Wireless Colour CCTV Video Camera with inbuilt
Video Transmitter and Micro Antenna.
Ideal for portable
& discreet / covert applications or virtually unlimited Monitoring /
Observation / Recording locations using multiple Receivers.
Wide range of lenses available 2.1
mm to 25 mm. Use 25 mm Lens for full
screen 'Head & Shoulders' or 'Cash Drawer' shots at 6 metres.
Cat Code:
REG12/0.3A
Regulated Plug Pack $12
Cat Code:
BRKT-1I Aluminium Swivel Mounting Bracket $8
CAMERA
Image Sensor: 1/4 inch
LOW BLEMISH
CCD, 512 x 582 pixels, PAL TV System. Sensitivity: ~ 3 lux @ F1.2 (this
value is provided for comparative purposes only. Signal : Noise Ratio ~
48 dB. Resolution: ~ 440 Horizontal Pixels (this value is provided for
comparative purposes only). Automatic Electronic Shutter: 1/50 ~ 1/100 000
second, 20 ms ~ 10 microseconds, additional information
here. Standard 1/4 inch UNC female thread Top & Bottom for Mounting
Bracket.
Power
Requirements: 12 Volts DC well filtered and Regulated, ~ 160 mA,
via 2.1 x 5.5 mm socket, Center Pin = (+). Dimensions: ~ 65 mm (L), ~ 32
(W), ~ 29 mm (H), excluding antenna. Antenna ~ 62 mm long, ~ 6 mm
diameter. Total weight ~ 60 grams.
VIDEO
TRANSMITTER 4 Channel (Australia 2 Ch) with 'Micro' antenna. Output:
2.4 ~ 2.483 GHz, 10 mW EIRP with 3 dB Micro Antenna, SMB connector.
|
All values are
approximate. |
@ 3
metres |
@ 5
metres |
@ 9
metres |
@ 15
metres |
Width
of Vision with 2.1 mm Lens |
5.1 metres |
8.6 metres |
15.4 metres |
25.7 metres |
Width
of Vision with 3.7 mm Lens fitted to Camera |
3 metres |
5 metres |
9 metres |
15 metres |
Width
of Vision with 5.7 mm Lens |
1.9 metres |
3.1 metres |
5.7 metres |
9.5 metres |
Width
of Vision with 8 mm Lens |
1.4 metres |
2.2 metres |
4 metres |
6.7 metres |
Width
of Vision with 16 mm Lens |
0.7 metres |
1.1 metres |
2 metres |
3.4 metres |
Width
of Vision with 25 mm Lens |
0.4 metres |
0.7 metres |
1.3 metres |
2.1 metres |
Security camera Lenses |
|
|
|
|
Manufacturer's
Experience: 10 + Years ISO 9001 Certified, made in Taiwan.
Camera is completely
"Self-Contained" no other components required, simply connect to Power Supply &
Video source.
Lens: Board
Type 3.6 mm Focal Length, accessory Lenses:
2.1, 2.9, Varifocal 3.9~8.3, 5.7, 8, 16 & 25 mm
(BL)
CCTV Lenses,
CCTV Security lens.
Compatibility:
Transmissions may be received with:
RX-Mini Mini 2.4 GHz AV Receiver
RX-TFT-56 2.4 GHz AV Receiver & 5" Colour TFT LCD Monitor
USES
Wireless Video RF
Transmission link for covert spy and Cable-Free Wireless CCTV Video Surveillance
Cameras, Quad Screen Processors, Switchers, Monitors, Multiplexers, Video
Recorders, Digital PC Recording.
Portable Wireless Video
Transmitter for covert pinhole video camera surveillance in Shops - Showrooms -
Exhibitions - Work Places - Casinos - Theatres - Concerts - Nightclubs - Outdoor
Events - Cinemas - etc. Portable Home Video Surveillance to monitor Swimming
Pools - Caravans - Boats - etc.
Observation of Horses -
Show Animals - Livestock - etc during transportation in Floats - Trucks - etc.
Automobile Rear Vision
and general observation Video Systems for Caravans - Large Boats - Semi Trailers
- Road Trains - Aircraft - Buses - Modern or Historic choo.. choo..
Trains - etc.
Wireless link for VCRs,
PCs, Lightweight Compact Video Cameras for shooting video program material,
Remote Control: Cars - Boats - Hovercraft - Aircraft, etc.
In Australia Video
Transmitters may be legally used without a licence within the *LIPD 2400 ~ 2463
MHz Band and 10 mW *EIRP limit.
RANGE
Depends on Surroundings,
Obstructions, other Transmitters (2.4 GHz Cordless Phones, Wireless LAN, etc),
Antenna Alignment, Electromagnetic & Radio Frequency interference in the
vicinity.
In ideal, clear,
Line-of-Sight conditions with Vertical 3 dBi Whip antenna on TX
Vertical 3 dBi Whip
antenna on Receiver up to ~ 100 metres.
Correctly matched and
aligned 18 dBi antenna on Receiver up to ~ 600 metres.
Due to the
nature of Radio Signals results are unpredictable (in the same manner as Mobile
/ Cellular Telephones) signals reflected from surrounding objects arriving at
Receiver antenna may Add-to or Subtract-from the direct signal from Transmitter.
Directional antennas may reduce affect of reflected signals.
RECEIVER ANTENNAS
Range and Signal to Noise
Ratio (SNR) may be improved by increasing gain of antenna on Receiver and/or
Transmitter (in Australia TX may only be fitted with 3 dBi antenna). For
maximum signal transfer TX and RX antennas should be the same polarity, that is
both oriented Vertically or Horizontally.
 |
Cat Code:
Ant-SMB
$25
3 dBi gain, ~
50 ohms impedance.
Length: ~ 62
mm. Diameter: ~ 6.5 mm. Weight: ~ 2 grams.
Pictured fitted
to also suits
TX-CAM2 &
TX-MOD 3
SMB male
Connector.
|
 |
Cat Code:
Ant-Stub
$5
0 dBi gain, ~
50 ohms impedance.
Length: ~ 52
mm. Diameter: ~ 9 mm. Weight: ~ 6 grams.
SMA male
Connector.
|
 |
Cat Code:
Ant-Whip $15
~ 3 dBi gain, ~ 50 ohms
impedance.
Length: ~ 145 mm straight
~124 mm folded. Diameter: ~ 9 & 10 mm. Weight: ~ 16 grams.
SMA male Connector.
|
 |
Cat Code:
Ant-W5dB
$20
~ 5 dBi gain, ~ 50
ohms impedance.
Length: ~ 195 mm straight
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top. Weight:
~ 30 grams.
SMA male Connector.
|
 |
Cat Code:
Ant-W9dB
$99
~ 9 dBi gain, ~ 50 ohms
impedance.
Length: ~ 610 mm ~ 825
mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main
center section ~ 24 mm top cap. Weight: ~ 470 grams ~ 730 grams with
Mounting Tube & Clamps/Brackets.
Supplied with Base Mount Tube and
Clamps/Brackets for surface or Tubular Mast mounting. N female
Connector. <Adaptors
& Extension Cables>
|
 |
Cat Code:
Ant-W12dB $129
~ 12 dBi gain, ~ 50 ohms
impedance.
Length: ~ 1210 mm ~ 1425 mm
with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main center
section ~ 24 mm top cap. Weight: ~ 670 grams ~ 930 grams with Mounting
Tube & Clamps/Brackets.
Supplied with Base Mount
Tube and Clamps/Brackets for surface or Tubular Mast mounting. N
female Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code:
Ant-Y8
$69
Yagi ~ 8 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-142 Coax cable. Dimensions
(excluding Clamps) ~ 290 x 95 x 35 mm, ~ 530 grams.
Cat Code:
Ant-Y12 $89
Discontinued
Yagi ~ 12 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 430 x 95 x
35 mm, ~ 600 grams.
Cat Code:
Ant-Y15 $99
Yagi ~ 15 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 650 x 95 x
35 mm, ~ 680 grams.
Common
Specifications: 2.4 ~ 2.5 GHz Dipole. Supplied with ~ 140 x 70 mm
Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-Y8C
$89
Compact Yagi
2.4 ~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohms impedance. Beamwidth: E70, H90.
Dimensions
(excluding Clamps) ~ 190 mm, ~ 75 mm diameter, ~ 500 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-Y10C
$99
COMPACT Yagi
2.4 ~ 2.5 GHz, ~ 10 dBi gain, ~ 50 ohms impedance. Beamwidth: E44,
H56.
Dimensions
(excluding Clamps) ~ 280 mm, ~ 75 mm diameter, ~ 500 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector.
|
 |
Cat Code:
Ant-Y12C
$109
Yagi 2.4 ~ 2.5
GHz, ~ 12 dBi gain, ~ 50 ohms impedance. Beamwidth: E35, H40.
Dimensions
(excluding Clamps) ~ 450 mm, ~ 75 mm diameter, ~ 650 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-Y16C
$119
Yagi 2.4 ~ 2.5
GHz, ~ 16 dBi gain, ~ 50 ohms impedance. Beamwidth: E28, H28.
Dimensions
(excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~ 750 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-Y17.5C
$149
Yagi Antenna
2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance. Beamwidth: E23,
H24.
Dimensions
(excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-F16
$129
COMPACT Flat
2.3 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~
27º (H) ~ 60º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling mounting &
two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm (D), ~ 740
grams.
Pictured in
Vertical Polarity orientation
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat Code: Ant-F18
$149
COMPACT Flat 2.3 ~ 2.5 GHz,
~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º (H) ~ 75º (V).
Supplied with versatile
selection of mounting hardware for Wall/Ceiling mounting & two Tubular
Mast Clamps.
Dimensions (excludes Socket
& Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950 grams.
Pictured in Vertical
Polarity orientation.
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-P10
$89
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 30º (H) ~ 60º (V).
Supplied with
Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~ 275 (W)
~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Pictured in
Vertical Polarity orientation.
SMA
female Connector. <Adaptors & Extension
Cables>
|
 |
Cat Code:
Ant-P18G $119
Sectional Grid Parabolic,
2.4 ~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance Dipole. Beamwidth ~
25º in vertical polarity mode, Front to Back ratio ~ 20 dB. Fitted
with ~ 750 mm RG-8/U Coax cable.
Reflector ~ 390 x ~ 545 mm.
Weight ~ 1.7 kilograms. Supplied with Hor/Vert Clamp mounting
hardware.
Carriage in an Air Satchel
$24, via Post $35.
Pictured in Vertical
Polarity orientation * Mast not included. Gold Irridite coated version
pictured, we now stock a more durable Galvanised version only.
N male Connector.
<Adaptors & Extension Cables>
|
ADAPTORS
 |
Cat Code: SMAm-Nf
$10
SMA male to N female. Suitable for P18G antenna. |
 |
Cat Code: SMAm-Nm
$10
SMA male to N male. Suitable
for F8N, W9dB, F12, W12dB, F16 & F18 antennas.
|
 |
Cat Code: SMAm-m
$10
SMA male to SMA male.
Suitable for P10 antenna.
|
 |
Cat Code:
Cable-178/30 $19
30 cm RG-178
Coax cable with SMA male & female connectors.
|
 |
Cat Code:
Cable-23/450 $59
~ 450 cm Coax Cable with SMA
male & female connectors. Attenuation ~ 0.75 dB/metre @ 2
GHz.
Cat Code:
Cable-23/450N $59
not pictured
~ 450 cm Coax Cable
with SMA & N male connectors. Attenuation ~ 0.75
dB/metre @ 2 GHz. Suitable for F8N, W9dB, F12, W12dB,
F16 & F18 antennas.
|
|
|
Parabolic Yagi &
Flat are directional antennas. Whip antennas when used vertically
are for most practical purposes omni or non directional.
To maximise
'Range' minimise the length of Coax Cable between Antenna and TX/RX.
|
|
Antenna Gain...
what does it mean ??? a simplified explanation
Received signal
strength from an antenna with 3 dBi gain will be double that from an antenna
that has 0 dBi gain, received signal strength from a 6 dBi will be double
that from a 3 dBi and so on... An increase in antenna gain of 3 dBi is
approximately equal to doubling the transmitter output, received signal
strength or range can be increased by raising antenna gain or transmitter
output. Range can be doubled by either increasing antenna gain by 6 dBi or
quadrupling the transmitter output.
The maximum allowed
2.4 GHz LIPD Video Transmitter output power is 10 milliwatts (mW) EIRP (in
Australia), increasing transmitter output is illegal and therefore not an
option.
Increasing the gain
of the receiver antenna is an alternative to increasing transmitter output.
In very simple terms: increasing antenna gain from 0 dBi to 3
dBi is equivalent to raising the output power of a 10 mW transmitter to ~ 20
mW. (5 dBi to ~ 33 mW) ( 8 dBi to ~ 66 mW) (12 dBi to ~ 160 mW) (15 dBi to ~
320 mW) (18 dBi to ~ 640 mW)
|
Video Transmitter &
Colour CCTV Video Camera * High-Sensitivity High Signal:Noise Ratio CCD Camera
with Wireless 4 Channel 2.4 GHz Video Transmitter & Micro Antenna * Ideal for
lower levels of illumination, Portable applications and for Multiple Monitoring
/ Observation / Recording locations * Compact 12 VOLT DC CCTV Video Camera & 2.4
GHz VIDEO SENDER / TRANSMITTER with Micro Antenna * Range in ideal clear
line-of-sight conditions up to 600 metres with High 18 dBi Gain Antenna *
EXCELLENT for discreet or portable monitoring at a distance, produces Full
Screen images of Cash Register Drawers * Head & Shoulders for ID @ 5 metres with
25 mm Lens.
